feet to inches
1 foot (ft) equals 12 inches (in). Type a value into either box below for an instant two-way conversion. For other units, use the full unit converter.
Chinese version: 英尺转英寸
Conversion factor
1 ft = 12 in
Reverse: 1 in = 0.0833 ft
feet to inches converter
feet（ft）
inches（in）
ft to in conversion table
| ft | in | Detail |
|---|---|---|
| 1 | 12 | 1 ft to in |
| 1.5 | 18 | 1.5 ft to in |
| 2 | 24 | 2 ft to in |
| 2.5 | 30 | 2.5 ft to in |
| 3 | 36 | 3 ft to in |
| 4 | 48 | 4 ft to in |
| 5 | 60 | 5 ft to in |
| 5.5 | 66 | 5.5 ft to in |
| 6 | 72 | 6 ft to in |
| 7 | 84 | 7 ft to in |
| 8 | 96 | 8 ft to in |
| 10 | 120 | 10 ft to in |
| 12 | 144 | 12 ft to in |
| 15 | 180 | 15 ft to in |
| 20 | 240 | 20 ft to in |
| 25 | 300 | 25 ft to in |
| 30 | 360 | 30 ft to in |
| 50 | 600 | 50 ft to in |
| 100 | 1,200 | 100 ft to in |
How to convert
To convert feet to inches, multiply: in = ft × 12
To convert inches to feet, divide: ft = in ÷ 12 (equivalently × 0.0833).
Example: 1 foot × 12 = 12 inches. The factor is derived from the international definition of each unit; results are shown to 4 significant figures.
Frequently asked questions
1 foot = 12 inches. The formula is: value in feet × 12 = value in inches. Use the converter above to convert any value instantly.
1 inch = 0.0833 feet. To convert back, divide the inches value by 12 (or multiply by 0.0833).
inches = feet × 12; conversely feet = inches ÷ 12. For example, 1 foot × 12 = 12 inches. The factor comes from the international definition of the units.
More conversions
in to ftcm to inin to cmm to ftft to mkm to milemile to kmli to kmkm to limm to cmcm to mmcm to mm to cmm to kmkm to mmm to inin to mmft to cmcm to ftyd to mm to ydchi to cmcun to cmzhang to mnmi to kmkm to nmimile to min to ftft to ydyd to ftin to ydyd to inmile to ftft to milenmi to milemile to nmiµm to mmµm to nmnm to µmchi to mm to chili to mm to li
Disclaimer: conversion factors are derived from international unit definitions and results are for reference only. For trade settlement, engineering or legal documents, follow the contract or official metrology standards.